Other

Eliminate dropped chains forever with the new OneUp Components Bash Guide. As the trend for lower and slacker bikes continues, chainring protection is becoming even more important. Revised for 2019 the OneUp Bash Guide uses simple, one tool installation and adjustment as well as an all new tool less flip The OneUp Bash Guide was developed with input from top EWS World racers and can be seen all over this years circuit. Reinforced Nylon bash guards and a back plate cut from 8mm thick 7075-T6 aluminum, ensure that the OneUp Bash Guide can handle the biggest hits, but at a weight of only 105g (34T) you may forget it’s even there. NOT JUST FOR ENDURO RACERS. The OneUp Bash Guide is equally at home on your trail bike, where the extra bash protection is a must for aggressive riders or on your DH rig. With the popularity of clutch derailleurs, it is no longer necessary to run a chain guide with a lower roller to effectively tension your chain. DH racers and Bike Park rippers will appreciate the huge reduction in drag with the elimination of the lower roller, without sacrificing any strength or chain retention. The OneUp Bash Guide includes 3 different sizes of bash plate for compatibility with chainrings from 28-36T. FEATURES - Tool less upper guide flip - Install without removing your crank - Single tool install and adjustment - Boost compatible - Oval Compatible - Black Stainless Steel hardware - Includes 3 bash plates (28-30T, 32-34T, 36T) - Patented US 10,053,188 Other Patents Pending SPECS - Weight: 90g 28-30T, 105g 32-34T, 110g 36T - Capacity: 28-36T - Chainline: 7.5mm adjustment - Mount: ISCG05 - Color: Black top guide piece included - Material: 7075 aluminum, top guide glass reinforced thermoplastic

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

Service your suspension fork with Enduro Seal KIts. - Custom made for each make and model of fork

The Problem Solvers Braze-On Front Derailleur Adapter simply clamps onto your frame's seat tube and provides a secure place to bolt on your braze-on front derailleur (sold separately). This fine adapter is made of light, durable aluminum and includes a stainless-steel bolt.

- Includes barb and olive - Brake Lever Clamp: 22.2mm, MMX compatible - Lever Blade Material: Carbon - Reach Adjust: Tool-free

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA

Hellbender bearings have an improved seal structure and are cross compatible with Cane Creek headsets.

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x10 Flat Head Screws

RockShox 32mm Seal Kit

Alloy shaft converts threaded forks to work with clamp on threadless Ahead-type stems. - Fits all models of threadless stems with 1-1/8 steerer clamp

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Fastener is not included - Replaces Cannondale Part # E123007-1 R3 (KP381) - For MAXLE Axles Not the same as DROPOUT-293. Check for correct thru axle fit.

Fits: REVIVE/REVIVE 2.0, REVIVE MAX, and DIVINE Includes: - x1, Cable clamp body (# 52) - x1, M4 Set screw (# 7)

Hose fittings fit many of SRAM's newest hydraulic brake models. - Includes 5 Threaded Hose Barbs, 5 Compression Fittings, 1 T8 Torx Wrench - Fittings are backwards compatible with older SRAM and Avid hydraulic brakes

- CNC machined aluminum alloy - Fits 26.8mm (1-1/8-inch) steer tube

Power Links provide tool free chain assembly. - 8-speed width: 7.1mm - 9-speed width: 6.8mm - Chain Compatibility: SRAM - Reusable: Yes

- Compatible with Shimano, SRAM, Campagnolo and KMC 11 speed chains - DLC Coated - Non-reusable - Opening Tool Required - Card of 2 pairs

Hose Kits, Barbs and Strain Relief for Servicing Reverb Lines.

Inline adjusters make on-the-fly derailleur cable tension adjustments safe and easy. - Indexed shifter adjustment, fits 4.0mm housing; not recommended for use with brake systems - Compact design improves performance when used on curved housing segments

Choose our 2X remote for your dropper if you don't have enough space for a Triggy under your left side handle bar, for example if you are still running 2-by or 3-by shifting with front derailleur or if you have anoter remote for suspension or e-support. It also features a hinged clamp, that allows snapping your remote onto your handlebars without having to take off grips or brake levers. The clamp is made from a high-tech plastic compound and aluminium. The paddle itself is made from 6061-T6 aluminum, black anodized and finished with a dark anodized BikeYoke logo. Allowing a maximum of 10mm cable pull our 2X is compatible with any known dropper post on the market. The cable/wire is clamped via screw on the lever itself.

RockShox 30mm Seal Kit

Includes all hydraulic seals to perform a complete cartridge rebuild of your BikeYoke dropper post. Compatible with: REVIVE / REVIVE 2.0

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA

Fits 2005 - 2009 Norco Fluid & Faze Features: - CNC machined from 6061 T6 Aluminum - Anodized pewter finish - Model: NSB DH0022

Fits 2009 - 2011 Trek Session 88 FR and DH This is not the same as NSB DH0066. It will not fit the Trek Scratch. Trek part #W285673 Features: - CNC machined from 6061 T6 Aluminum - Anodized pewter finish - Model: NSB DH0026

Fits: - Giant Anthem Advanced 27.5 2 (2014) - Giant Anthem 27.5 1, 2, and 3 (2014) - Giant XTC 27.5 0 (2014) - Giant Trance Advanced 27.5 2 (2014) - Giant Trance 27.5 1, 2, 3, and 4 (2014) - Giant Lust 1 and 2 (2014) - Giant Intrigue 1 and 2 (2014) - Giant Obsess Advanced 1 and 2 (2014) Features: - CNC machined from 6061 T6 Aluminum - Anodized pewter finish - Model: NSB DH0112