Alpine Touring Ski Bindings
$449.99 - $479.99
The ultra-light pin binding (245 g w/o brake) offers active length compensation during ski flex and an impressive power transfer downhill due to a 38 mm drill pattern. The carbon-reinforced toe provides great stiffness and comes with anti-ice pads and integrated elastomers for easy stepping in. The heel features a climbing aid with 0°, 5°, and 9° angle and allows super convenient switching between hike and ride mode. PERFECT STEP-IN - Integrated elastomers serve as a visual aid and allow easy stepping in. - Anti-ice pads prevent icing of toe and heel - Length adjustment up to 15 mm (+/- 7,5 mm) PERFECT HIKING UPHILL - Only 245 g due to ultra-light construction - Easy to use climbing aid (0° / 5° / 9°) - 0° walking mode for long, slightly elevated ascents - Fast shift mode for super fast angle changes of the climbing aid - Easy mounting of the crampon, available in 4 widths PERFECT DOWNHILL RUN - Perfect power transfer thanks to a 38 mm drill pattern - Maximum stiffness due to carbon-reinforced toe components - Length compensation of the ski flex - Adjustable horizontal release with DIN-settings 4 - 9 or 6 - 12 - Fast and simple switching between hike and ride mode - Brake width: 110mm - Length adjustment: 265 – 325mm (Short), 305 – 365mm (Long)
The innovative Kingpin has earned its stripes as the performance standard in PinTech AT binding technology. With DIN/ISO 13992:2007 certification from Germany's prestigious TuV testing organization, the Kingpin's unique toe and heel pieces are the culmination of years of R&D testing. Ease of use, DIN/ISO certified release function, and best of all, unbeatable power transmission while on the descent mean that you've never had a day in the backcountry like the ones you'll have on the Kingpin. Apart from these benefits this binding offers tremendous walking and step-in comfort with individually adjustable stop points, wide drill pattern, 6-pack Power Springs on front and XXL Power Transmitter for impressive power transfer and climbing aids from 0° to 13°. KINGPIN HEEL - The revolutionary heel construction for the PinTech bindings features wide sole contact points to deliver the kind of direct, lossless power transfer more frequently seen in alpine bindings. KINGPIN TOE - The PinTech design on the KingPin toe piece promotes an ergonomic rolling up the foot and the most direct possible connection to the ski. Six steel springs capture the energy optimally, up to a DIN setting of 13. Fixed positioning blocks make it quick and easy to step in no matter what the conditions. CLIMBING AID (KINGPIN) - Good climbing aids have one thing in common: Whatever the situation, they can be operated by feel, even when the skier can't see them clearly. Simplicity is a virtue here, and reduced exertion is even better. The KINGPIN wins hearts and minds through two integrated climbing aids (7° and 13°) that are easily deployed or stowed using the basket of the pole. They can also be operated conveniently using the tip of the pole, allowing them to work with any basket style. Because the climbing aids are positioned in the upper center of the heel piece, they are always easy to reach. WALK/SKI MODES - The refined locking/unlocking procedure for the heel piece is part of the binding's charm. It takes just one step to switch from walk to ski mode: Simply flip a lever, push down on the heel and you're good to go. The mechanism works even in critical situations and challenging descents. SAFETY RELEASE - The KINGPIN offers release functionality and values similar with those found on alpine bindings. The heel of the KingPin releases not only vertically but in addition sidewise. The energy, consistency and efficiency of the release of the KingPin heel are comparable with the standards for alpine bindings. The heel design with contact pressure and classical sole seat delivers perfect length compensation, preventing unintended releases or compromised ski flex. One major advantage of the KINGPIN in terms of safety is the possibility to ski in the unlocked position (lever on the heel in "ski," not "walk" position!).
The HM 12 Is a lightweight, high-performance free-touring binding. The frameless design weighs only 1270g/pr, allows a more natural ski flex for enhanced downhill performance, and features a pivoting pin-tech toe piece for increased elasticity, offering skiers more confident retention and reduced pre-release. TuV approved. - Brake Width: 90-120MM - Weight: 630g 1/2 Pair - DIN/ISO: 5-13
Atomic Shift MNC 13 is a game-changer: the world’s first binding with full touring and freeride capability in one. It’s a genuine tech binding for hiking complete with pins. Then flick the Hike and Ride switch to ski mode and it turns into a genuine freeride binding for the way down, compatible with all normed boots on the market – alpine and touring. So for the first time you don’t have to compromise when you’re touring or skiing – either by hiking with a heavy solution like frames or skiing downhill with pins. You get the best for both. And even better, you can also use it for your alpine skiing days with your normal alpine boot. Finally, one binding for everything! - Multi Norm Certified (MNC) - Walk To Ride Compatible (WTR) - Hike and Ride Switch - Crampon Compatible - Easy Step-in - Low Profile Chassis - Oversized Platform - Freeski Brakes - Toe Height Adjustment
Page 1 of 1