Filter By:
- Bottom Brackets (21)
- Brakes/Levers/Pads (69)
- Cables (13)
- Cassettes/Freewheels (22)
- Chainrings (42)
- Chains (23)
- Cranksets (18)
- Derailleurs (29)
- Show More Categories
- Forks (7)
- Handlebar Grips/Tape (38)
- Handlebars (11)
- Headsets (12)
- Pedals (36)
- Saddles (17)
- Seatposts (12)
- Shift/Brake Combinations (2)
- Shifters (26)
- Shocks (5)
- Stems (13)
- Other (92)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts
$1,614.99
- 35mm chassis with a focused all-mountain mindset - satisfyingly stiff, efficient and designed to eliminate as much weight as possible.
- ButterCups block 20% of high frequency "trail chatter". Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control.
- Charger 3 features a new Internal Floating Piston (IFP) design with better fidelity, performance and truly independent adjustments without any "cross talk".
- DebonAir+ is built to balance butter-like small bump feel, increased air volume, and higher overall ride height
- Ultimate Bushing Package maximizes the fork's bushing overlap, reducing friction and creating the smoothest ride possible
- Pressure Relief Valves eliminate unwanted air pressure build up in the lower leg caused by variations in altitude or temperature.
- RockShox premium short fender included
$1,427.00 - $1,566.00
ZEB Ultimate is a whole new breed of fork, designed to challenge the limits and take on the world’s toughest Enduro tracks. Going Ultimate has its advantages—this fork has a stiff, 38mm chassis designed with the Charger 2.1 damper, DebonAir spring technology, SKF Wiper Seals, and Maxima Plush Fluid. It pairs our highest performing, athlete-proven technologies with premium style.
- New, 38mm chassis for increased stiffness and rider confidence
- Updated, highly tunable DebonAir spring offers a buttery-smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain
- Charger 2.1 RC2 damper features independent high and low-speed compression adjustments
- Dual Position Air adjustment option to change the geometry of the bike for climbs and descents
- Ultra-low-friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel
- Maxima Plush damping fluid reduces friction and silences damper noise
- Ultimate foil graphics package
$999.99 - $1,266.99
$999.99 - $1,689.99
Up to 25% Off
THE HARD HITTING LONG-TRAVEL ENDURO SPECIALIST
When you need to go really big, reach for the 38. Optimized for 160-180mm of travel and packing the same revolutionary feature set as the 36, the 38 redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability. Welcome to the big time.
- Genuine Kashima Coating on upper tubes
- GRIP2 damper and FLOAT EVOL air spring
- Low friction seals for improved performance
- Lower Leg Bleeders and Bypass Channels
- Floating axles for perfect alignment
- Updated Crown Design saves up to 20 grams, and offers significant structural improvements
$1,077.99
$1,539.99
30% Off
WELCOME TO THE CORONATION. THE UNDISPUTED ALL-MOUNTAIN CHAMPION GETS A NEW CROWN.
For MY23 the FOX 36 receives an update in the form of a new crown with updated design and engineering for more steer tube overlap improving durability and maintaining stiffness while dropping 20 grams.
- Genuine Kashima Coating on upper tubes
- GRIP2 damper and FLOAT EVOL air spring
- Low friction seals for improved performance
- Lower Leg Bleeders and Bypass Channels
- Floating axles for perfect alignment
- Updated Crown Design saves up to 20 grams, and offers significant structural improvements
$999.99
$1,549.99
35% Off
What’s included? XTR M9100 1×12 Speed Upgrade-Kit 10-51 Bar Clamp
XTR SL-M9100 11/12-speed Shift Lever I-SPEC
XTR RD-M9100 12-speed Rear Derailleur SGS
XTR CS-M9100 12-speed Cassette 10-51t
CN-M9100 12-speed Chain 126 Links with Quick-Link
Raceface Turbine 170mm w/ 32t ring
Raceface BB92 30mm
$919.99
EADY TO RACE
STRAIGHT OUT OF THE GATE
Featuring an entirely new chassis and damper, delivering enhanced tunability, smoother performance, and more progressivity than ever before.
DOES NOT INCLUDE SPRING
ADJUSTMENTS
- Optional 2-position Open/Firm lever (retains high and low speed compression adjustment)
- High-speed compression - 8 clicks
- Low-speed compression - 16 clicks
- High-speed rebound (w/VVC) - 8 clicks
- Low-speed rebound - 16 clicks
- Coil spring preload - (new detents on spring collar)
SPECS & FAMILY FEATURES
- NEW chassis & damper
- NEW detents on spring collar to prevent loosening under light preload conditions
- NEW high-flow main piston
- NEW MCU bumper for increased end stroke progression and bottom out control
- NEW ultra-low friction, highly durable hard chrome damper shaft finish
- NEW improved high-speed rebound tunability via the addition of VVC (Variable Valve Control)
- NEW improved bearing ratio for metric sizes
- NEW graphics
- Matching 8-click HSC and HSR adjustment on GRIP2 forks and X2 shocks
- Increased control and decreased harshness via linear damping
- Steel outer body and finned inner body for improved structural rigidity and reduced hysteresis
- Independent firm mode circuit – firmer lockout than previous DHX2
- Reduced friction
- Reduced length reservoir for a better fit on more frames
$799.99 - $844.99
- The all-new Super Deluxe Coil Ultimate was designed from the ground up, bells and whistles included.
- Equipped with an entirely new chassis, the new RC2T damper with independent High and Low Speed Compression adjustment externally located for quick access, increased bushing overlap for improved small bump performance, and the HotDog Piston designed to keep your tires on top of rough terrain.
$799.99
Mastodon is a real-world trail suspension for fat bikes. This fat bike fork delivers all-temperature performance, working equally well in winter or summer, soaking up chatter and big hits. Extended ride height versions fit up to 26×5.15” / 27.5×4.5” tires. Standard ride height versions fit up to 26×4” / 27.5×3.8” tires on the snow, or taking on shimmering hot sand like a pro. All-temperature performance is born of frigid winter ride-testing. 34mm trail chassis is stiffer and steers more precisely than any other fat bike suspension fork.
- Dorado Air Spring
- MC2 Compression Damping
- TPC Rebound Damping
- Extended platform accommodates 26" tires up to 5.15" and 27.5" tires up to 4.5" wide, and is optimized for frames that are designed around taller ride heights
- Flawless performance down to 0 degrees Fahrenheit (-15 deg C)
- Externally adjustable MC2 incremental platform compression damping
- 15x150mm tooled Hexlock axle
- 34mm butted aluminum stanchions provide stiffness and stability
- Internally adjustable travel, 100mm adjusts down to 80mm and 120mm adjusts up to 140mm
$769.99
COIL PERFORMANCE FOR THE TRAIL AND BEYOND
Answering the prayers of riders seeking the ultimate in plush suspension, the new DHX brings coil-sprung, magic-carpet, trail-smoothing performance in a wide range of configurations to the trails and beyond.
ADJUSTMENTS
- Independent 2 Position Open/Firm Lever
- Low Speed Rebound – 16 Clicks
- Low Speed Compression – 11 Clicks
- Coil spring preload - (new detents on spring collar)
SPECS & FAMILY FEATURES
- ALL-NEW chassis and damper
- High-flow main piston
- Numbered Tool-free 12 position single-turn LSC (Low Speed Compression) adjuster
- Independent firm mode circuit – 2 position adjuster
- Optimized reservoir lengths per shock size
- Hydraulic top out feature
- Reduced damper noise
- MCU bottom out bumper
- Single-turn rebound adjuster with a variety of access modes (Tool-free, 3mm hex (direct access), 2mm hex or similar (side access)
- Spring preload collar with detents and max / min number of clicks and direction arrow
- Full diameter spring retainer with wire ring (like DHX2)
- Spring scuff guard on body (like DHX2)
ALL FACTORY DHX SHOCKS
- Shaft Coating Chromoly - Ultra-low friction, highly durable damper shaft finish
- VVC Rebound Yes
- Detents on spring collar Yes
$699.99
The Performance Series shock has the 2-position climb switch, low speed compression, and low speed rebound adjustments only. There are no high speed damping adjustments on the shock.
$699.99
The XG-1299 cassette completes the expression of the world's most accomplished and sought after bikes. Designed for use with our proven, reliable XD driver body, this 12-speed cassette offers a massive gear range. In independent tests, the X-Dome architecture is proven to yield the strongest cassette on the market. New shifting characteristics improve both inboard and outboard shifting as well as chain retention.
- SRAM’s cassette manufacturing technology provides the greatest durability and lightest weight
- All-new shifting features create a smoother, quieter system with enhanced inboard and outboard shift performance
- XD driver body compatible
Cogs
- 10 – 50T: 10, 12, 14, 16, 18, 21, 24, 28, 32, 36, 42, 50
- 10 – 52T: 10, 12, 14, 16, 18, 21, 24, 28, 32, 36, 42, 52
$649.99
$1,089.99
40% Off
The Shimano XTR BR-M9120 hydraulic 4-piston disc brake with 2-finger brake lever, fits seamlessly into the line-up of the new XTR M9100 component group. Higher braking force with less effort on the fingers and extremely linear response to the lever movement.
4-piston disc brake with excellent braking power for front and rear: Shimano XTR BR-M9120, brakes include RT86 203mm rotors
Starting from a brake system, which was already the benchmark for mountain bike brake systems, the SHIMANO engineers revised the design of the new brake levers M9120. Both the clamp and the lever body itself have been modified. The clamp moves further into the middle of the lever and is angled. This cleverly supports the outer end of the expansion tank directly on the handlebar and creates an additional abutment when the lever is actuated. This significantly increases stiffness and stability, which ultimately leads to an even more direct braking feel and improved controllability.
Features – XTR BR-M9120 4-Piston Disc Brake Set
Quicker rebound between actions maintains rider concentration
Greater flexibility and action-optimized cockpit layout
Update brake lever shape
Seamless operation
High rigidity
High-performance brake control
4-Piston Caliper
Brake Caliper for Postmount Brake
Optimized ergonomic 2-finger brake lever
SERVO-WAVE
One-Way bleeding
I-Spec EV compatible – securing the shift lever on the brake lever
$599.99
Built off the proven Next R crank arm shape and spindle insert, the Next SL stands to be lighter, with major improvements in durability and carbon consistency. Made in Canada with American-sourced carbon, the Next SL is also stiffer, improving power transfer and giving you the competitive edge on your pedal-oriented cross country rig.
- Increased stiffness and strength improves power transfer
- Removable spider offers the ability to convert between existing chainring standards while remaining flexible to future developments
- Includes 30mm CINCH spindle, and is power meter compatible
- Direct mount chainline: 52mm / 58.5mm (Flipped Ring)
- 2X Cinch spider chainline: 50.5mm
- Boost 2X Cinch spider chainline: 53.5mm
- Number of Chainrings: No Rings Included
- Chainline/Hub Compatibility: 135/142 MTB Hubs, 141/148 Boost Hubs, 150/157 DH Hubs
- Crank Intended Use: Mountain
- Pedal Spindle: 9/16"
- Spindle Interface Type: RaceFace/Easton CINCH
- Chainring BCD: Direct Mount CINCH
- Weight: 418
- BB Included: No
$584.99
The GX Eagle Transmission derailleur is a lesser version of nothing. It delivers everything an Eagle Transmission derailleur possibly can, and then some. It features a revised battery position and a reconfigured gearbox to better protect itself from impacts. To maintain crisp shifting and striking appearance throughout its entire lifespan, hard-chargers can replace both its protective skid plates and two-piece outer link, if needed, making this the most repairable derailleur we’ve ever made. It also features the first ever tool-free cage and clutch assembly – so it’s both removable and upgradable too. With a steel inner cage that adds even more robustness, it’s been built for riders of the real world. Just like all Eagle Transmission derailleurs, it’s been engineered with a first-of-its-kind Hangerless Interface, mounting around the wheel axle itself and making direct contact with the cassette with no hanger required. The new transmission derailleurs feature the same intuitive pairing and set-up procedure as our Eagle AXS derailleurs. The revolutionary Full Mount attachment method creates a far stronger connection because it grips both sides of the frame. Let the record show that the GX Eagle Transmission derailleur plays second fiddle to nothing. It’s all in for all day.
- Revised battery position, reconfigured gearbox, replaceable skid plates and outer link, tool-free cage and clutch
- Install and pair via the reliable and familiar standard AXS set-up and pairing procedure
- Hangerless Interface, Full Mount attachment method
- Radically clear setup process, no adjustment required
- AXS battery and Pod controller available separately
$554.99
Simplify your drivetrain with SRAM's XG-1195 11-Speed X-Glide Cassette. It has a monstrous 10-42 tooth spread that gives SRAM's 1x11 drivetrain pretty much the same gearing as 2- and 3-ring setups, with less weight, parts, and complexity. Yes, you can still spin up your hardest climbs. A key thing to note, is that even with the huge range, there are no huge jumps or dips in the gearing, so your cadence and pedaling stay consistent as you move up and down the entire cassette. The wide-open design makes it incredibly lightweight and aids in mud clearance, giving you cleaner shifting and longer component life. The XG-1195 is for use with SRAM's X01 or XX1 drivetrain.
$449.99 - $549.95
3 years of REVIVE out in the market resulted in another benchmark product for BikeYoke: REVIVE 2.0. The new extralong 213mm REVIVE required a lot of re-thinking and re-engineering the whole chassis structure and since we think they deserve it, the shorter REVIVES will also get all the nice updates, and benefit from what was originally implemented only for the longest sibling of the REVIVE family.
Noteworthy updates of the REVIVE 2.0 include:
- One piece 3D-forged upper tube unit for improved stiffness and strength
- Fully hard-anodized pin seats in the upper tube for improved corrosion-resistance
- CNC-finished actuation lever for even smoother engagement
- New upper saddle clamp and saddle bolts with integrated conical washers for even simpler saddle installation
Wanna know more about the REVIVE? What if there was a dropper post, that actually solves and not just improves reliability issues, saves cost and time on the long run, and does not let you worry about too much time spent at service-centers? Or how about “bleeding” your seat post within a few seconds, while it is still installed in your bike?
BikeYoke presents the REVIVE dropper post, featuring one of the most brilliant design features in dropper post design in many years. More than 10 years of experience in drop-post design went into the “REVIVE” and the development has finally paid off.
Of, course, just as many other companies, BikeYoke would say, that REVIVE is reliable and strong and smooth. And yes, REVIVE is all of that, but not because we tried to improve current designs, but because we were thinking outside of the box and created a new concept, that is completely different from everything before.
To understand the benefits over other posts you have to know about the problems of many current designs first. Many of the popular current seatpost designs are based on a hydraulic lockout-system that relies on a perfectly sealing IFP (Internal Floating Piston), separating oil from air to prevent the seatpost from getting sagging or bouncing. There are a lot of difficulties to overcome when using an IFP because an IFP has to maintain 100% sealing function. If air could go to the oil side, your post will start becoming springy. This happens to a lot of posts in the market already and is the main issue why posts need to be serviced.
That´s why BikeYoke´s “REVIVE” features a NON-IFP design, because we think it is too difficult - if not impossible - to make a really reliable design using an IFP. REVIVE only requires 2 dynamic seals in the hydraulic circuit: The shaft sealing and the main piston sealing for the lockout mechanism. The highly critical IFP has been removed, and with it the need of perfect concentricity and finish of the sealing surfaces of the tubes. The lack of an IFP also results in the smoothest action you can think of.
The most important and ground-breaking feature of Revive is its “REVIVE-VALVE”. Even REVIVE can get air somewhere where it does not belong. This can happen for example when you actuate your seatpost while its upside down. And here is where the patented RESET VALVE comes into play:
- Insert a 4mm Hex Key into the REVIVE hex port, turn it and push down the post by hand.
- This will reset your hydraulic circuit on the fly - whenever. wherever. This is done just within a few seconds and only by the turn of a 4mm Allen key or the integreated mini reset lever, that comes with the post - of course without even having to remove your drop post from your bike.
So, now one might already understand that:
- No external air will want go inside the post´s hydraulic circuit, since it is charged with higher pressure, than its surroundings.
- No oil will go out (or at least very very little oil over the curse of a long time), because of very stable sealing - external sealing has never been a real problem of current post design
- The hydraulic system can be reset to “new” via the unique “REVIVE-valving”
- This means the hydraulic circuit is a very stable closed system and basically maintenance free.
Still there are parts that will need to be serviced sooner or later and when designing REVIVE it was put a lot of attention to maximum user-friendly serviceability:
- Bushings and keyway pins will wear over time. Usually, the pins wear first and you would want to replace them to reset your rotational play.
- Exchanging the pins and the lower bushing is simple and does not require any opening of the hydraulic system and can be done within less than 5 minutes.
1 set REVIVE dropper post includes:
- 1x REVIVE Seatpost
- 1x cable housing 1500mm
- 1x inner wire 1700mm
- 2x housing endcap
- 1x barrel cable clamp
- 1x air valve adapter
- 1x Quick-Reset-Lever
- 1x remote (optional)
- 1x BikeYoke I-spec adapter or Splits Clamp (optional)
- 1 set titanium saddle bolts and nuts (optional)
$499.99
Designed specifically to meet the demands of aggressive trail riders, the new FLOAT X combines sophisticated damping and fade free performance with incredible light weight and outstanding structural integrity.
$249.99 - $479.99
The proven Transfer seatpost gets lighter and tighter. Completely redesigned from the ground up, with improved serviceability, decreased weight, reduced length, and decreased insertion depth.
"Factory" says it all. The best-of-the-best technology we have to offer is available in our Factory Series models with our buttery smooth, ultra-durable Genuine Kashima Coat. These products are World Cup proven.
The Transfer continues the excellent reputation of smooth function and great reliability with an infinitely adjustable height design, and internal or external cable routing options. Low lever force and great modulation make it easy to regulate return speed and small height adjustments. The Factory Series Transfer features Genuine Kashima Coating for maximum performance.
- Cable actuated with tool-free quick disconnect for easier installation and removal
- Low lever force provides consistent actuation pressure even with saddle weighted or unweighted
- Easy to modulate return speed with lever
- Factory Series models feature Genuine Kashima Coat
- Remote lever sold separately
$400.00 - $460.00
Specialized's Command Post IRCC, offers Cruiser Control technology. With ten micro-adjust positions, you'll always be able to find just the right saddle height for descending like Gwin or climbing like Sauser.
- Patented mechanical locking system with the addition of Cruiser Control Technology.
- Cruiser Control technology features added positions in the cruiser control range.
- Bonded lightweight aluminum micro-adjustable “alien” style head.
- Dual-keyway system eliminates saddle wiggle.
- Energized triple-lip wiper prevents contamination.
- Durable zero-gap, dual-lip x-ring internal seal ensures long-term durability.
- Ships with SRL and grip mounted lever.
$449.99
Mirror goes Pro. Our best-reviewed saddle technology, based on two decades of Body Geometry research and development, is now available on the Power Pro saddle. Looking beyond foam, we developed Mirror technology. By 3D printing with a liquid polymer to create an infinitely tunable honeycomb structure, Mirror saddles perfectly reflect your anatomy to keep you comfortable, powerful, and healthy in your unique position.
- Patented Body Geometry design is lab-tested to ensure blood flow to sensitive arteries.
- Mirror technology utilizes 3D printing from liquid polymer to create a one-of-a-kind honeycomb structure that offers superior sit-bone support and comfort.
- Reclaimed carbon fiber and nylon-injected base. 15% reclaimed carbon fiber.
- Titanium rails.
- SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions.
$449.99
Mirror goes Pro. Our best-reviewed saddle technology, based on two decades of Body Geometry research and development, is now available on the Power Pro saddle. Looking beyond foam, we developed Mirror technology. By 3D printing with a liquid polymer to create an infinitely tunable honeycomb structure, Mirror saddles perfectly reflect your anatomy to keep you comfortable, powerful, and healthy in your unique position.
The Power Pro with Mirror starts with our Power shape—beloved by riders worldwide for its extra-wide and elongated Body Geometry channel—and is topped with the exact same Mirror pad as our S-Works Power with Mirror, a patent-pending matrix of 14,000 struts and 7,799 nodes, each of which can be tuned individually to deliver unprecedented sit bone comfort and soft tissue protection. But our Pro-level saddle features titanium rails and a reclaimed carbon fiber base to bring Mirror technology to more riders on more terrain than ever before.
The bike may be the most sustainable transportation ever created, but we need to do more. The saddle's carbon base is built with our all-new reclaimed carbon process. This is our first step on the road to closed-loop production, maximizing efficiency in production and minimizing waste. Using carbon scraps from factory production, combined with injected nylon, we're building a more sustainable carbon base.
With the Power Pro's titanium rails, Mirror technology is now more durable than ever. It's so strong that our Mirror technology is now trail-ready, so go ahead and huck that gap. Trail riders have sit bones too, after all. Whether you're on the road or trail, going up or down, the Power Pro with Mirror will get you there comfortably and quickly. It's the perfect reflection of you.
- Titanium rails.
- Mirror technology utilizes 3D printing from liquid polymer to create a one-of-a-kind honeycomb structure that offers superior sit-bone support and comfort.
- Reclaimed carbon fiber and nylon-injected base. 15% reclaimed carbon fiber.
- Patented Body Geometry design is lab-tested to ensure blood flow to sensitive arteries.
- SWAT™-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions.
- Approximate weight: 251g (Size 155mm)
- Approximate weight: 245g (Size 143mm)
$424.99
The Tech 4 V4 was designed for aggressive enduro and downhill riding and builds on Hope’s 25+ years of experience designing and manufacturing hydraulic brake systems.
The Tech 4 uses all new internal sealing for reduced friction and the pivot spins on roller bearings, allowing the spring rate to be reduced. The lower spring rate in turn gives a lighter lever action, reducing rider fatigue and keeping their legendary feel and modulation.
The updated V4 caliper utilizes hybrid style Stainless steel pistons with a phenolic insert allowing for smoother movement and less maintenance, while still able to manage high temperatures without heat transfer during extreme use.
$250.00 - $419.99
Saddle Up
Based on the latest FOX Transfer platform with its proven performance, the new Turbine R Dropper Post features a slick seat clamp design for reduced stack height and a 25g weight savings from the previous version. This post will treat you right.
Less is More
New, patent-pending FOX seat clamp design dramatically reduces stack height, allowing you to fit more travel into a shorter space.
Full Coverage
Proven FOX-designed internals provide infinite height adjustment, but perhaps more importantly—even easier serviceability.
No-Sweat Installation
Mounting a saddle and getting your saddle position dialed is easy thanks to the user-friendly seatpost clamp.
Brilliantly Uncomplicated
Uses standard shifter cable and housing. You know, just to keep things real. Oh yeah—it's also 25g lighter than the previous version.
- Compatible with Matchmaker
- Includes post only
- Mechanical lever actuation
- Head Type: Zero Offset—2 Bolt
- Weight: 520g
$384.99
SRAM's full-powered Code brake now features technology to improve your cockpit aesthetic: Stealth. The lever body design brings the hose closer to the bar, allowing for a sleeker, more modern ride. The proven internals remain the same, with SwingLink driving the signature feel. And for unrivaled ease of customization, Code Silver Stealth features Tool-free Reach and Contact Point Adjust. Confidence is king, and Code Silver Stealth reigns supreme on the slew of more-capable-than-ever-before trail bikes, as well as heavy-duty giants like enduro, gravity, and E-MTB.
- Stealth lever body with pivot bearing and forged aluminum blade designed to complement SRAM's AXS cockpit
- SwingLink technology with custom designed cam shape helps reduce deadband with increasing progressive power throughout a pull
- Tool-free reach adjust provides customized hand fitment
- Contact point adjustment allows you to choose when to engage
- Durable 2-pc forged aluminum 4-piston caliper with stainless steel hardware for corrosion resistance
- Bleeding Edge technology matches the bleed port to ensure proper syringe engagement and reducing contamination
- Steel-backed metallic sintered pads come standard for more power and longer wear
- Includes MMX clamp
$379.99
The Shimano GRX Dual Control Lever delivers light and responsive shifting for mixed-terrain riding. The ergonomic shifter design improves comfort and the textured, anti-slip brake lever increases control on bumpy terrain.
- Gravel-inspired lever and bracket ergonomics
- Anti-slip brake lever
- Greater mixed-terrain control
- Same light shifting operation as top-tier systems
Left/Front
- ST-RX810-L: Shimano GRX - Hydraulic Disc Brake - Dual Control Lever - 2 x 11-speed
Right/Rear
- ST-RX810-R: Shimano GRX - Hydraulic Disc Brake - Dual Control Lever - 11-speed
$364.99
The lightest, longest, smoothest and most reliable dropper post that will fit your bike.
The V3 is the lightest infinitely-adjustable dropper post on the market, it has the shortest total length and stack height of any dropper post, 20mm of adjustable travel, an extended 350-hour service interval, and new ultra-low friction IGUS® bushings and SKF® seals.
Lightest.
This is the lightest infinitely adjustable dropper post on the market. Even lighter than 2-position XC specific lightweight posts and suitable for all rider heights, weights and riding styles. Save an additional 10g with the Ti Bolt Upgrade Kit.
Smoothest.
This is the best feeling dropper you’ll ever ride. It takes 75% less actuation force to drop your saddle, it has ultra low-friction, self-lubricating IGUS® bushings and a low friction SKF® wiper seal keep the V3 running smoother for longer, with less maintenance.
Reliable.
A simple and reliable low-maintenance design is insanely easy to work on at home using only the OneUp EDC multi-tool or three standard tools (14mm wrench, 2mm & 5mm hex). Plus, it has a super long, 350-hour interval between recommended services.
Get the Most Drop.
Whether you ride an XS or XXL, the V3 is the longest post that will fit your bike. It has the shortest stack height and shortest total length of any other post and offers 20mm of adjustable travel. Use our Dropper Post Length Selector to find your perfect post. Easy.
$364.99
The lightest, longest, smoothest, and most reliable dropper post that will fit your bike.
The V3 is the lightest infinitely-adjustable dropper post on the market, it has the shortest total length and stack height of any dropper post, 20mm of adjustable travel, an extended 350-hour service interval, and new ultra-low friction IGUS® bushings and SKF® seals. Plus, save an additional 10g with our Titanium Bolt Upgrade Kit.
$364.99
If your ride doesn't feel complete until you get a little dirt on your tires, you know the importance of capable components that can tackle anything. The Rival XPLR eTap AXS rear derailleur is a dedicated 1x-specific unit designed for use with the XPLR 10-44 cassette. It makes for an uncluttered drivetrain that takes on pavement and singletrack with equal aplomb. Wireless and proven eTap shift logic, AXS connectivity and advanced chain management mean this derailleur does exactly what you want when you need it.
- Wireless electronic eTap shift logic for intuitive shifting, easy setup, and reliability
- 1x specific for use with 10-44T XPLR and 10-36T cassettes
- SRAM AXS enabled, allowing easy personalization
- Chain management keeps the drivetrain quiet and secure
- Large X-SYNC pulleys for increased durability and efficiency
- Compatible with existing eTap batteries
- Cage Material (RD): Aluminum
- Pulley Bearings Material: Steel
- Max Tooth: 44
NOTE: Does not include eTap battery. Compatible with existing eTap batteries.
$359.99
The RD-M9100 XTR rear derailleur is intended for use with 1x drivetrains. It is compatible with both 11- and 12-speed cassettes.
- Decreased rear derailleur tension at low gear position, to prevent high chain tension
- Added bumper at rear derailleur pulley cage
- Bigger 13T pulley
- Direct mount compatible
- Compatible cassette size: 10-51 (12-speed), 10-45 (11-speed)
- Total capacity: 35t (GS Medium Cage) / 41t (SGS Long Cage)
$349.99
- Excellent Pedaling Efficiency
- Optimized Balance Of Weight And Rigidity
- Injection Molded Carbon Composite Body
- Hollow Cleat Bolt
- Efficient Power Transfer
- High Stability
- Extra-Wide Platform
- Efficient Power Transfer/Durability
- Reduces Flex And Pedal Body Wear
- Stainless Steel Body Plate
- Excellent Pedaling Efficiency
- Smooth Rotation
- 2-Ball Bearing, 1-Wide Roller Bushing
- Reliable Durability Performance
- Stable And Uniform Load Distribution
- Wide Bearing Placement
- Rider Tune
- Customize The Entry And Release Tension Settings
- Adjustable Entry And Release Tension Settings
- Shimano 3-Year Limited Warranty
- Average Weight: 224g
- Shimano SPD-SL cleats included
- Standard (52mm)
- Wide (56mm)
Page 1 of 17
Next page