Tools & Tuning

Good wax iron for alpine and cross country skis. 110 Volt, 500 Watt. The 8 mm thick plate gives a stable temperature. T73 has manual choice of temperature by indication of degrees and is simply done by an adjustment wheel. Adjustment range from 100°C to 165°C. Also available for 220 Volt (product # T73220).

PS6 is very versatile. Its area of use stretches from underlayer for powder to racing wax and base prep wax for cold skis. PS6 has good durability and offers great performance on natural and artificial snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. PS6 can be used as a race wax alone or as a base for powders and other top coats. Recommended iron temp: 145°C (293°F). - Recommended iron temp: 145°C (293°F). - Replaces the CH6X - -6°C to -12°C (21°F to 10°F).

Aluminum World Cup file guide for base edges, 0.5°. - File guide - For filing base edges - For alpine skiers and snowboarders - Extremely precise

Aluminum World Cup file guide. For precision filing base edges. Produces a bevel of 0.75°. Most precise file guide on the market. - File guide - For filing base edges - For alpine skiers and snowboarders - Extremely precise

Sidewall cutter for Racing. A high-quality, easy-to-use sidewall cutter. Removes plastic on sidewalls of skis and snowboards to expose more of the steel edges. Makes filing steel edges easier. Supplied with round and square titanium blades. - Sidewall cutter - For removing plastic material - For alpine skiers and snowboarders - Precise and efficient

Great economy wax iron for alpine and nordic. Value for the money! 110 Volt. 1000 Watt. Great economy iron which is competitive with far more expensive models. Redesigned from scratch with an ergonomic body and a wide metal plate that suits both alpine, snowboard and nordic. Angled at one side to make it easier to keep a constant speed when melting the wax. The thick metal plate ensures a stable heating. Plate dimension 100x160 mm. Also available for 220 Volt (product # T77220).

A very versatile allround brush! Quality bronze brush for glide waxes. Medium bronze brush. Ø 0.15 mm. First brush used after scraping. For brushing glide wax out of the structure. 10 strokes.

Base edge file guide, made of aluminum, 0.5°. - File guide - For filing base edges - For alpine skiers and snowboarders - Precise

Robust racing file guide, 87° - Tool for side edges - For filing steel edges - For alpine skiers and snowboarders - Extremely precise

Great together with SWIX glide wax cleaner! All-round nylon brush. Good quality all-round nylon brush for cross-country/alpine skis and snowboards.

Practical all-round brush with pocket-sized nylon bristles. Top quality. - Nylon brush - For polishing glide wax - For those who want a better skiing experience - Ergonomically designed

Problem solver. Backcountry and alpine touring skin wax. Skin Wax for backcountry and alpine touring. To be applied on skins to prevent icing up & provide easier glide. Dirt repellent. Great for all snow conditions. Aerosol with applicator. 5 fl. oz. *Extremely flammable aerosol. Pressurized container: May burst if heated. Causes skin irritation. May cause drowsiness or dizziness. Toxic to aquatic life with long lasting effects.

Used primarily for removing burrs and rounding steel edges at the front/rear area of alpine skis and snowboards.

Used primarily for removing burrs and rounding steel edges at the front/rear area of alpine skis and snowboards.

Practical combi pack with Fibertex. Fibertex Combi Pack with Fine (T266)/ Medium (T264) and Coarse (T266N) for ski base care.

Replacement files for file guides TA3001 and TA3001N. - 40 mm x 22 mm x 3.3 mm.

Steel scraper for experienced waxers. Sharp steel scraper for peeling or straightening bases.

It is important that the scraper is sharp at all times. This makes it easy and effective to work on the base surface. The less sharp the scraper is, the more pressure is required. This may negatively affect the properties of the base. Sharpen the scraper using Swix T0408, T410 and T412-220. - Base Preparation

It is important that the scraper is sharp at all times. This makes it easy and effective to work on the base surface. The less sharp the scraper is, the more pressure is required. This may negatively affect the properties of the base. Sharpen the scraper using Swix T0408, T410 and T412-220.