Pedals

Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms.

Lightweight, strong 1-piece Polypropylene thermoplastic body - Tough 7mm boron steel axle - Engineered Polymer Bearing replaces traditional loose ball bearings for a simpler, lighter construction and smoother spinning pedal - Fineline reflectors included (removable) - 9/16" axle - Dimensions: 110.5 x 100.5mm - Black - 301g per pair

Protect the soles of your shoes with the Shoe Shields from Crank Brothers. These stainless-steel plates install under your cleats and prevent the pedal from digging in to your carbon-soled shoes. - Sold in pairs

The MADE by LOOK KEO standard is recognized in the cycling world for its minimal weight and compact design of the cleat and pedal combo. Of course, compatible with all pedals on the market, their memory positioner is a major advantage when changing your cleats. Their principle and use are the same as the DELTA cleat standard; engagement and disengagement remain efficient and reassuring. - Use: Road - Material: Polyamide + PTFE - Lateral adjustment: 4mm - Longitudinal adjustment: 12mm - Weight (pair + fasteners): 68g

Shimano's SPD cleats are perfect for all your SPD-compatible pedals. If your entry and exit isn't what it used to be, a cleat replacement is just what the bike doctor ordered.

Shimano's SM-SH56 Multi-Release Cleats disengage with less effort and in more directions than standard SPD cleats. - Not compatible with Shimano PD-M858 (XTR) SPD pedals

The ATAC cleats are developed for the TIME mountain bike pedal range (MX and XC range). By switching right and left cleats, you can choose two options for the release angle: 13-degrees or 17-degrees. - Weight: 45g/pair

Cleats with a more forgiving 10-deg release. - Optimized for novice riders or those new to clip-in pedals - 10-deg release angle makes it easier to unclip - 2-hole bolt pattern for mountain bike shoes - Plastic spacing shims included - Compatible with all Crankbrothers clip-in pedals

Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability. - SPD compatibility - Weight (pair): 30g - Float: 6 degrees - Release angle: 15 or 20 degrees

Your pedals like to be pampered. The Crank Brothers Pedal Refresh Kit gives you everything you need to keep them happy. Pedal Refresh Kit includes: -Enduro catridge bearings - Igus LL-glide bearings - Double seal system (internal and external seals) - Hex alloy end caps - O-rings - Nuts - Sleeve bushings - Bearing removal tool Compatible with the following pedals (2010-present): - Eggbeaters - Candys - Mallets - 5050s

- Allows a customer to replace their cleats. - Two replacement cleats in box

The KEO GRIP cleats closely resemble the KEO CLEAT model, yet they boast the added feature of a TPU layer on the shoe side which prevents the risk of cleats sliding on carbon soles. Their anti-slip surface on the pedal side offers extra safety and stability when walking. - Use: Road - Material: Polyamide + TPU - Lateral adjustment: 4mm - Longitudinal adjustment: 9mm - Weight (pair + fasteners): 68g

Everything you need to fully rebuild your OneUp Aluminum Pedals. Our V2 kit is compatible with all OneUp Aluminum pedals. The brass bushings take the place of the 3 small cartridge bearings and aluminum washer that were on our original pedal assembly. KIT CONTAINS - 2 LARGE OUTER BEARINGS - 2 BRASS BUSHINGS - 2 OUTER SEALS - 2 FLANGE WASHERS - LH AND RH AXLE BOLTS - 2 AXLE O-RINGS - LH AND RH BEARING NUTS

The RaceFace Ride pedal features a slim nylon-composite platform, and offers a concave and lightweight design for legitimate performance. - Molded traction pins give you all the grip you need without risk of damaging your shoes or shins - Durable Cro-Mo steel axle features a standard 9/16” pedal thread and serviceable internal parts - 9/16"

Shimano's SPD-SL cleats are perfect for all your SPD-SL-compatible pedals. Available in three models to suit your ergonomic needs, with fixed/0-degree, 2-degree, and 6-degree options. These cleats come as a pair and include all required mounting hardware. They are compatible with three-bolt cycling shoes. - 0° Float/fixed type = SM-SH10 - 2° Float/front center pivoting type = SM-SH12 - 6° Float = SM-SH11

A new addition to the Race Face flat pedal line up: the Chester Pedal. This tough and burly nylon composite body provides a large platform with the same grip as traditional alloy pedals via the bottom loading 8 hex traction pins per side. Thin and lightweight is the name of the game with Chester, featuring a cro-mo axle that is fully sealed and a 100% serviceable bearing and bushing system. This pedal offers great performance for a wide range of riders at a price that leaves plenty of cash in pocket to spring for that round of bevies at your local watering hole after hammering out a day of hot laps with the crew. - Nylon composite body - Replaceable steel pins (8 per side) - Fully sealed - Serviceable - Smooth and durable sealed bearing and bushing system - Cro-mo axle - Thin and lightweight concave platform - Large platform with same grip as traditional pedals

Here For The Party A party's just not a party until Chester shows up. This burly nylon-composite pedal is big on features, small on price, and fully ready to tear up some trail. A concave body, replaceable traction pins, and a cro-mo sealed axle are all representing. The Full Meal Deal A slim yet durable nylon-composite body is accented with a concave design, built-in traction treads and 8 replaceable traction pins per side. Not Just Another Axle Made to stand up to punishment, the durable sealed cro-mo axle rolls on a completely serviceable bearing + bushing set-up. Bling For Your Bike No build is complete without sick looking color-Coordinated pedals. Chester pedals come in multiple vibrant colors to choose from. Specs - Platform Height: 18.4mm - # of Pins: 16 SHCS hex traction pins per pedal (8 per side) - Platform L x W: 101 x 110mm - Axle Material: Chromoly Steel - Body Material: Nylon Composite - Material: Nylon Composite - Weight: 360g

Here For The Party A party's just not a party until Chester shows up. This burly nylon-composite pedal is big on features, small on price, and fully ready to tear up some trail. A concave body, replaceable traction pins, and a cro-mo sealed axle are all representing. The Full Meal Deal A slim yet durable nylon-composite body is accented with a concave design, built-in traction treads and 8 replaceable traction pins per side. Not Just Another Axle Made to stand up to punishment, the durable sealed cro-mo axle rolls on a completely serviceable bearing + bushing set-up. Bling For Your Bike No build is complete without sick looking color-Coordinated pedals. Chester pedals come in multiple vibrant colors to choose from. Specs - Platform Height: 18.4mm - # of Pins: 16 SHCS hex traction pins per pedal (8 per side) - Platform L x W: 101 x 110mm - Axle Material: Chromoly Steel - Body Material: Nylon Composite - Material: Nylon Composite - Weight: 360g

Size specific composite platform pedal with optimal shoe/pedal interface. - Optimal surface area - Minimal profile 13mm thin - 9 hex traction pins per side - Premium bearings & seal system - Stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - Body Material: Composite - Footprint: 111mm x 114mm - Hex Traction Pins: 9 per side (mounted from back) - Inner Bearing Type: Igus LL-glide bearing - Outer Bearing Type: Enduro cartridge bearing - Shoe Size: 10-15 (us) // 43-49 (eu) - Spindle Material: Forged scm 435 chromoly steel - Warranty: 5 years - Weight: 329g per pair

Size specific composite platform pedal with optimal shoe/pedal interface. - Optimal surface area - Minimal profile 13mm thin - 9 hex traction pins per side - Premium bearings & seal system - Stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - Body Material: Composite - Footprint: 111mm x 114mm - Hex Traction pins: 9 per side (mounted from back) - Inner Bearing type: Igus LL-glide bearing - Outer Bearing type: Enduro cartridge bearing - Spindle Material: Forged scm 435 chromoly steel - Warranty: 5 years - Weight: 329g per pair

Discover the world of clipless pedals with the KEO CLASSIC 3. The easily adjustable tension makes clipping in and out smooth and simple, with the ability to increase tension to fully appreciate the pedal and all its advantages. - Technology: Spring - Cleats: Keo Grip - Retention: 8 to 12 - Body: Composite - Spindle: Chromoly - Platform Material: Composite - Platform area: 400mm² - Platform width: 50mm - Q Factor: 53mm - Stack height + cleats: 17.8mm (11.5 + 6.3mm) - Weight (pedal): 140g - Weight (pair + cleats): 350g

Shimano's M540s are race-ready clipless pedals that don't require a team budget. These rugged, light beauties feature dual-sided Shimano SPD bindings that are easy to enter and exit and deliver excellent power transfer and maneuverability. The bindings are adjustable for dialing in the perfect tension and these sweet pedals have an open mud-shedding design to prevent clogging. Plus, the M540s are built to last with chromoly axles and sealed-cartridge bearings. - 352 grams (pair)

Crank Brothers' most versatile pedal. The Candy excels at it all—cyclocross, XC, trail, and all mountain. 4-sided entry enables superior mud-shedding capability, and customizable float and release angles create a dialed-in feel. Specs: - Spindle material: Forged scm 435 chromoly steel - Body material: 6061-T6 aluminum - Wing material: Stamped steel - Spring material: 300 series stainless steel - Release angle: 15° / 20° - Q-factor: 52mm - Inner bearing type: Igus LL-glide bearing - Outer bearing type: Enduro cartridge bearing - Cleat: Premium brass cleats with shims included - Weight: 355g per pair - Warranty: 5 years

Little pedal for big rippers. We created the Radar for the young rippers. Designed around a platform shaped to fit kids' feet in the age range of approximately 4-10 years old. The Radar is made with the same precision axle and bearing system as our Contact and Scarab models for smooth running and long durability. It is serviceable and re-buildable. It features a lightweight extrusion design with our custom pins and our unique concave platform shape.

Size-specific enthusiast-level platform pedal provides optimal shoe/pedal interface. Details - Optimal surface area - Minimal profile 16mm thin - 10 adjustable 8mm pins per side for grip - 10mm pins available for purchase here - Premium bearings & seal system - Stamp small recommended for shoe sizes: 5-10 (US) // 37-43 (EU) - Stamp large recommended for shoe sizes: 10-15 (US) // 43-49 (EU) - Serviceable, pedal refresh kit available Specs - Adjustable pins: 10 per side - Body Material: A380 Aluminum - Endcap: T15 - Footprint: 100mm x 100mm (Small), 114mm x 111mm (Large) - Inner Bearing Type: Igus Bearing - Max Rider Weight: No restriction - Outer Bearing Type: Double Cartridge Bearing - Shoe Size: US 5-10 // EU 37-43 (Small), US 10-15 // EU 43-49 (Large) - Spindle Material: Forged SCM 415 Chromoly Steel - Warranty: 5 years - Weight: 439g per pair (Small), 494g per pair (Large)

- Large pedal platform - Lower platform height for pedaling stability - Robust retention claws provide smooth engagement and release - Customize the entry and release tension settings - Strong, durable chrome-moly spindle with 8 mm hex wrench mount - Sealed mechanism - SM-SH51 Cleat included - 1.0 mm cleat spacer included - Binding: Dual sided - Cartridge axle - Cleat retention adjuster - Average weight: 342g - Optional cleat: SM-SH56 - Pedal Type: Off-Road (SPD)

- Wide pedal-to-shoe contact - Lower platform height for pedaling stability - Integrated cage increases stability and control when not clipped in and protects binding mechanism against impacts - Robust retention claws provide smooth engagement and release - Customize the entry and release tension settings - Strong, durable chrome-molly spindle with 8 mm hex wrench mount - Sealed mechanism - 1.0 mm cleat spacer included - Binding Dual sided - SM-SH51 Cleat included - Cleat retention adjuster - Integrated cage - Cartridge axle - Average weight: 438g - Optional cleat: SM-SH56 - Pedal Type: Off-Road (SPD)

Minimal & lightweight for xc/trail riding. 4-sided entry enables superior mud shedding, and customizable float and release angles create a dialed-in feel. Specs: Spindle material: Forged SCM 435 chromoly steel Body material: Cast stainless steel Wing material: 17-4PH stainless Spring material: 300 series stainless steel Release angle: 15° / 20° Q-factor: 52mm Inner bearing type: Igus LL-glide bearing Outer bearing type: Enduro cartridge bearing Cleat: Premium brass cleats with shims included Weight: 280g per pair Warranty: 5 years

At 110 x 105MM, Chromag's Scarab pedals feature one of the widest platforms available, yet thanks to the thin profile and chamfered corners, it has great clearance. Chromag's proprietary extrusion and machined design provides an ultra thin true-concave profile that is only 13mm at platform center. Custom traction pins are made of hardened steel and feature two height options via the removable washer. A shear line reduces pedal damage when the pins are struck. Each pedal features 42 placement options for the ultimate customization. • Low profile 13mm at platform center • True concave design • Custom adjustable height pin • 42 pin placement options • 430g / pair

Crank Brothers' game-changing hybrid pedal is now available in a trail-ready version designed for more aggressive riding styles. Details - Hybrid pedal half flat / half clip-in - 8 adjustable traction pins and textured finish for grip - Wide 57mm q-factor for stability at speed - Diamond plate pads for traction - 2-sided entry / superior mud shedding - Premium bearings & double seal system Specs - Adjustable pins: 8 per side - Body material: A380 aluminum - Cleats: Premium brass cleats with shims included - Inner bearing type: Igus LL-glide bearing - Max rider weight: No restriction - Outer bearing type: Enduro cartridge bearing - Q-factor: 57mm - Release angle: 15° / 20° - Spindle material: Forged scm 435 chromoly steel - Spring material: 300 series stainless steel - Warranty: 5 years - Weight: 403g per pair - Wing material: Cast stainless steel